PUNTO DE ACCESO IP-COM Pro-6-IW WIFI 6 AX3000 DOBLE BANDA 2.4/5Ghz DE PARED

DEBE ESTAR LOGUEADO CON CUENTA DE DISTRIBUCIÓN PARA PODER COMPRAR ESTE PRODUCTO. Y DEBE COMPRARLO SÓLO A TRAVÉS DE LA FAMILIA: IP-COM (VENTA SÓLO A PROFESIONALES), NO PODRÁ COMPRARLO A TRAVÉS DE ESTE ENLACE.

PUNTO DE ACCESO IP-COM Pro-6-IW WIFI 6 AX3000 DOBLE BANDA 2.4/5Ghz DE PARED

- Support k/v/r fast roaming
- Support IPTV penetration
- Traffic control function
- Double-sided tape installation
- 3000 Mbps Wireless rate

- Overview:
Pro-6-IW is a Gigabit dual-band panel AP based on the new Wi-Fi 6 standard. It realizes a bandwidth of 160 MHz and a wireless rate of 3000 Mbps, which is twice that of ordinary Wi-Fi6 products. The fast roaming feature enables the AP to automatically select a better quality wireless network. With just one Ethernet cable, you can enjoy both wireless and wired networks. Pro-6-IW is a wise choice for you to deploy high-performance WLAN network for the double-sided tape installation method it added.

- Wireless speed up to 3000Mbps, 160MHz channel bandwidth
Smooth experience for 8K movies:
Pro-6-IW adopts the new generation WiFi6 technology, with160MHz channel bandwidth, dual-band concurrent wireless rate up to 3000Mbps. Pro-6-IW is designed to meet every network need in downloading, VR games, cloud gaming, etc. It can deliver simultaneous high-speed internet access to 80 devices.

- New "suspended" Antenna Design Better signal,wider coverage:
Two omni-directional independent antennas, equipped with a 4-way FEM signal amplifier. Compared with other ordinary APs, wireless signal transmission and reception capacity is increased by 2 times, which can easily cover 250? villa/large suite. Unique antenna design effectively reduces co-channel interference and makes the WiFi signal more stable.

- 802.11k/v/r seamless roaming, uninterrupted switching Strong Wifi on the go:
With a unified SSID for the whole house, the internet device automatically connects to the AP node with the best signal, and latency is low to 50ms. Wherever you go, the wireless speed is always smooth and stable.

- Two-side tap design,No tools needed,No damage to walls
Super easy installation:
The Pro-6-IW can be installed with a double-sided tap on the back, plug in the cable and the AP will be attached to the original network port panel. The location is flexible and it can be installed in a bedroom, study or balcony.

- Standard 86 panel design to fit any house Wireless coverage in four easy steps:
Standard 86 type panel design with high scene adaptation. For installation, simply remove the original AP and replace it with Pro-6-IW, no rewiring is required and no damage is done to the original wall surface.

- 111 small louvre cooling holes + high efficiency circulation duct
Better cooling performance, faster internet speed:
Unlike traditional in-wall AP designs, the shell of Pro-6-IW is higher than wall by 3 cm, increasing the contact area with air and speeding up heat dissipation without affecting the aesthetics of the space. At the same time, it is equipped with 111 cooling holes which increase the cooling efficiency by 30%.

- Separated IPTV and Internet ports Enjoy both TV and Internet
Pro-6-IW provides a separated IPTV port, which is connected to STB box, avoiding the trouble of laying network cables.

- Supports centralised management of Cloud Platform/APP Efficient and intelligent, easily reduce O&M costs
Supports unified deployment, configuration and management of devices.
You can use the IP-COM Cloud Platform and APP to manage your operations and maintenance from anywhere.


* ESPECIFICACIONES:

- Model: Pro-6-IW
- Category: In Wall
- Dimensions: 86*86*32 mm

- Frequency band: 2.4 GHz, 5 GHz
- Wireless standards IEEE 802.11a/b/g/n/ac/ax
- 2.4 GHz data rate: 1-574 Mbps
- 5 GHz data: rate 6-2402 Mbps
- Channel width: 20 MHz/40 MHz/80 MHz/160MHz
- MU-MIMO: 2X2 MU-MIMO
- Ethernet port:
One 1000 Mbps LAN Port (PoE)
One 1000 Mbps LAN Port
- Button: 1*Reset
- LED indicator: Bi-Color LEDs
- Max. power consumption: 8.5W
- Power supply standard: IEEE 802.3af PoE, DC 12V 1A
- Max. connected clients: 256
- 2.4 GHz Antenna gain: 4 dBi
- 5 GHz Antenna gain: 5 dBi
- Transmission Power:
CE:<20 dBm(2.4 GHZ, EIRP)    <23 dBm(5 GHZ, EIRP)
FCC:<26 dBm (2.4 GHz)  <26 dBm (5 GHz)
21+/1.5dBm
23+/1.5dBm
- 2.4 GHz 802.11b RX sensitivity: -95.5 dBm
- 2.4 GHz 802.11n (MCS7) RX sensitivity: -72.5 dBm
- 5 GHz 802.11a RX sensitivity: -97.5 dBm
- 5 GHz 802.11n (MCS7) RX sensitivity: -77.5 dBm

- Operating mode: AP, Client+AP
- Hide SSID: Supported
- Max. No. of SSID:
2.4 GHz: 8
5 GHz: 8
- OFDMA: Supported
- Beamforming: Supported
- TWT: Supported
- 802.11k/v/r: Supported
- WEP: Supported
- WPA-PSK: AES/TKIP
- WPA2-PSK: AES/TKIP
- WPA3-SAE: AES
- WPA: Supported
- WPA2: Supported
- Access control: MAC address-based
- Adjustable power transmit: Supported
- Frequency analysis: Supported
- AP isolation: Supported
- Connected clients control: Supported
- Weak Signal Client Limitation: Supported
- Prefer 5 GHz: Supported
- WMM: Supported
- VLAN tagging for SSID: Supported
- LED indicator control: Supported
- Diagnostics tool: Ping
- Scheduled reboot: Supported
- Reboot at specified interval: Supported
- Device management: Web management, controller management, cloud platform management, APP management
- System logs: Supported
- Firmware Upgrade: Local and AC upgrade
- Reboot: Local and AC reboot
- Reset: Local and AC reset
- Backup configuration: Supported
- Restore configuration: Supported

- Default login IP address: 192.168.0.254
- Default user name: admin
- Default password: admin
- Operating temperature: -10? - 40?
- Operating humidity: (10% - 90%) RH, non-condensing
- Storage temperature: -30? - 70?
- Storage humidity: (5% - 90%) RH, non-condensing