PUNTO DE ACCESO IP-COM CPE6S WIFI 802.11AC 5GHz 12dBi EXTERIORES

DEBE ESTAR LOGUEADO CON CUENTA DE DISTRIBUCIÓN PARA PODER COMPRAR ESTE PRODUCTO. Y DEBE COMPRARLO SÓLO A TRAVÉS DE LA FAMILIA: IP-COM (VENTA SÓLO A PROFESIONALES), NO PODRÁ COMPRARLO A TRAVÉS DE ESTE ENLACE.

PUNTO DE ACCESO IP-COM CPE6S WIFI 802.11AC 5GHz 12dBi EXTERIORES

- Pre-configured & plug and play(kit)
- 5GHz 11AC 867Mbps
- 12dbi directional antenna
- Four fast ethernet Port
- IP65 waterproof enclosure
- 6000V Lightning Protection
- 12V 1A DC/12V 1A Passive PoE supported

- Overview:
CPE6S 5GHz Outdoor CPE is designed to PtP&P2MP solutions for video surveillance transmission and wireless broadband access. Adopts of 11ac wireless technology, the maximum wireless rate can be up to 867Mbps. It features with 12dBi dual polarization directional antenna to provide an efficient way to pick up and maintain a stable long range connection.

- 5+km transmission Range:
CPE6S adopts of internal power amplifier and 12dBi directional antenna to provide an efficient way to pick up and maintain a stable signal for a wireless network up to 5km.

- Flexible power supply method enable it easy to deployment:
CPE6S support 12V 1A Passive PoE and 12V 1A DC power supply optional. It helps the engineer to deployment the device flexiblely.

- ipMAX--IP-COM TDMA proprietary protocol:
ipMAX is IP-COM TDMA (Time Division Multiple Access) proprietary protocol to improve performance and capacity for wireless P2MP outdoor application scenarios. In outdoor environment, the CPE use highly directional antennas to connect to the Basestation from distances that can span several kilometers. the CPE can't sense each other, they become "hidden nodes" and cannot coordinate access to the wireless channel. Thus the Basestation experiences frequent collisions from stations transmitting simultaneously. As the network scales, these collisions build up exponentially, increasing latency and lowering throughput. With ipMAX, it coordinate all the data transmission and allocates time to active clients to provide greater noise immunity performance when compared to the conventional 802.11 CSMA/CA (Carrier Sense Multiple Access / Collision Avoidance) protocol.

- Auto-bridge technology enable it to easy setup:
For single pack,iLink, IP-COM proprietary auto-bridge technology, makes the CPE or basestation in factory default settings connect to each other automaticaly after the device is powered on. For the kit pack, the two CPESs inside are pre-configured at the factory, so plug and play is supported without manual pairing. It is very useful for the person who is not familiar with network knowledge, especially for CCTV surveillance transmission application.

- Easy to Setup and Manage:
CPE6S comes with a centralized management software that helps users easily to manage all the devices in the network from a single PC-CPE Controller.

- Professional Outdoor Design:
Equipped with IP65 waterproof enclouse and high quality hardware design, CPE6S can work in various weather conditions, such as sunshine, rainfall or extremely low/high temperature environment


* ESPECIFICACIONES:

- Model: CPE6S
- Dimensions: 193*109*61mm
- Deployment: Pole/Wall Mount
- Application Scenarios: PtP and PtMP wireless connection for Privated ISP access or CCTV Surveillance

- Frequency Range: 5GHz
- Compliant Standards: IEEE 802.11a/n/ac
- Private TDMA Protocol: ipMAX
- Maximum Wireless Rate: 867Mbps
- Interfaces: 4*10/100Mbps Ethernet Port
- Antennas Gain: 12dBi
- Antenna Beamwidth: Horizontal: 30° Vertical: 30° Elevation: 30°
- Reset Button: 1
- Power Consumption: 4.7W
- Waterproof Level: IP65
- LED indicator: Power,PoE/LAN1,LAN2,LAN3,LAN4LED1,LED2,LED3
- Power Method:
12V1A Passive PoE
12V 1A DC
- Lightning Protection: 6000V
- PoE 802.3af/at: /
- Passive PoE:
Passive power over ethernet via PoE/LAN (+4,5pins, -7,8pins ) up to 60 meters
Voltage range: 11-13V DC
- Receive sensitivity:
11a 6Mbps -92dBm±1.5dBm
11n MCS7 HT20 -72dBm±1.5dBm
11ac MCS9 HT80 -64dBm±1.5dBm

- Operating mode: AP/Station/WISP/P2MP/WDS Repeater/Router
- Enable/Disable Wireless Radio: Support
- SSID Hidden: Support
- Wireless Client isolation: Support
- SSID Isolation: Support
- Channel Bandwidth: 20/40/80MHz
- Client Limitation For SSID: Support
- Wireless Access Control: Support
- Weak Signal Client: Limitation Support
- Transmission Power: Adjustable power by 1dBm
- WMM Capable: Support
- APSD Capable: Support
- Wireless Security: 64/128 WEP,WPA-PSK,WPA2-PSK,WPA&WPA2-PSK,WPA,WPA2
- Transparent Bridge: Support
- VLAN Tagging for SSID: Support
- DHCP Server: Support
- VPN Pass-Through: PPTP,L2TP
- Remote Web access: Support
- Schedule Reboot: Support
- Page Timeout: Support
- Ping Watchdog: Support
- Dyndns: noip, dyndns.org
- Network Diagnoses: Ping, Traceroute, Signal Scan
- Time&Date Setting: Support
- Firmware upgrade: Support
- Backup/Restore Configuration: Support
- Username Managerment: Support
- System Log: Support
- Managed By Controller: PC Software -- CPE Controller